Lab 37: Configuring Multi-site VPN using L2TP

Server VMS: Windows Server 2008 R2, Windows Server 2012 R2, or Windows Server 2019 Client VMs: Windows 7, Windows 8.1, or Windows 10

1. Setup VMs according to the lab setup.

2. Configure IPv4 address on each interface.

3. Configure SRVxx-ISP as a LAN router. Do NOT configure any static routes on SRVxx-ISP

Configure SRVXX-ISP as a DNS and Web server for INTERNET.

4. Configure NAT on each branch router. Test NAT

5. Configure Site-to-Site VPNs (L2TP): LA-to-NY, LA-to-SD, and LA-to-SA. For testing, using a Windows 7 VM, you should be able to ping any VM with a private IP address. Configure the routing table properly on each VPN router.

6. Configure DHCP on SRVxx-01 for Remote Access VPN clients

7. Configure Remote Access VPN (L2TP) on the SRVXX-03.

8. Test Remote Access VPN using SRVxx-ISP.

9. On a Windows 7 VM, test the connectivity to WWW.INTERNET.COM.